![]() Modes available on your connected radio show in bold. ![]() The Mode popup displays/controls which mode is active on the radio. (This control will not be accurate with radios like the FT-857 & FT-897 that do not report the VFO in use and must be synchronized manually.) The VFO popup displays/controls which VFO is in use on the radio. (You can also configure the Griffen Power Mate control knob to change the frequency.) (Holding down the Option Key will decrease the coarseness of the adjustment by a factor of 10) (Holding down the Shift Key will increase the coarseness of the adjustment by a factor of 10) The Horizontal slider controls the radio frequency, and snaps back to center when you release it. You may have to click in the VFO Area first, or use the horizontal slider to set the focus to the VFO - The up/down arrows will show as enabled when the VFO is in focus and ready to take keyboard arrow or PowerMate input. The up/down arrows on the keyboard change the VFO frequency by +- 1.0 kHz. The right/left arrows on the keyboard change the VFO frequency by +- 5 kHz. will respond to Keyboard or Powermate clicks). (This control hilighting will also indicate if the VFO is in focus - i.e. The small up/down arrow changes the VFO frequency by 100 kHz. (Use carriage return to terminate keyboard entry of this field to set the radio.) The numeric readouts display/control the radio's frequency in MHz. (This control can also be toggled with the VFO File menu option or the keyboard shortcut) It's a good idea to turn this off when your radio is not connected or turned off or MacLoggerDX may appear sluggish. ![]() You will have to set your preferences in the Prefs panel for the type of radio you are using, baud rate etc. The radio VFO area is enclosed by the Radio VFO check box which connects MacLoggerDX to your rig. The control window has 3 main active areas: When the disclosure triangle is clicked to face right, the window is collapsed and none of the panels are visible. Control Window Index Control Window (Collapsed)
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |